Tires & Automotive tire inspection

Tire Checks: What a Complete Check Covers and What a Digital Check Adds

A tire check covers four things: tread depth, pressure, condition, and age. What your team writes down at each check decides how much the next one can tell you.
perform a complete diagnosis with mobile data capture to improve tire check process

In March, a technician tells the customer the front tires have a few months left. The car is back in October for an oil change, and the customer asks if those tires are due now. The March visit left one line on the repair order: “Tires OK.” With the depth and mileage on file, the October technician could see how fast those tires are wearing. The customer would leave with a rough date for the next set.

However, that is not the case in every shop. Logging tire data by hand is slow, so it becomes a bottleneck for technicians. When time is tight, tread depth is usually the first thing rushed or skipped.

What does a tire check include?

A complete tire check covers four areas at every wheel position: tread depth, inflation pressure, condition and age. Your technician needs all four for a complete diagnosis, and a tire inspection checklist keeps them in order.

For tread depth, NHTSA’s tire safety guide says to replace a tire at 1/16 in (2/32 in), where the wear bars sit level with the tread. Depth also varies across the width, so one good groove can hide a worn shoulder. Our guide on how to check tire tread depth covers the tools.

Pressure is checked cold against the placard on the driver’s door edge. The number on the sidewall is the tire’s maximum. Condition covers cuts, bulges, exposed cord and uneven wear. Tire wear patterns can point to an alignment or inflation problem, and your technician makes that call.

Age comes from the last four digits of the DOT code: the week and year the tire was built. The full code only has to appear on one sidewall, so the date sometimes faces inward. NHTSA notes that some vehicle and tire manufacturers recommend replacing tires that are six to 10 years old, regardless of treadwear.

Why do regular tire checks matter for your shop?

Regular tire checks matter because tread wears steadily between tire purchases, and each check shows you how fast. Two tires that pass the same check can still be a long way apart.

European Commission researchers reviewed tire wear data for passenger cars. They put front-axle wear at about 1 to 1.2 mm per 10,000 km, and rear-axle wear at about half that. At the front-axle rate, a tire at 8/32 in and one at 6/32 in are roughly 8,000 to 10,000 miles apart. Both leave the bay marked OK.

Record the depth and the odometer at each visit, and two visits give you the car’s own wear rate per axle. Your service advisor can then say when new tires will be due, and whether a rotation would even out the axles first.

Checks also catch tires already past due. During National Tire Safety Week 2026, 15% of the tires that professional customers inspected with TireBuddy in the US measured below 3/32 in.

What is a digital tire check?

A digital tire check is a tire check done with a phone or tablet app that measures the tread and saves each result to an inspection report.

TireBuddy is Anyline’s digital tire inspection app. The technician starts with the license plate or VIN, so every reading lands on the right vehicle. Scanning the sidewall then adds the size, make, model, and DOT code in seconds. Discount Tire uses Anyline to read DOT codes in almost 1,100 US stores.

The app then measures the tread across the outer, center and inner zones of each tire. The technician adds photos and notes on any damage, and the app can also record the odometer. The TireBuddy report then goes to the customer by email, text or print.

AreaManual tire checkDigital tire checkWhere the manual check holds up
Tread depthGauge or coin at one or more points; the number is kept only if someone writes it downMeasured across outer, center and inner zones at each wheel position and saved to the reportA gauge costs a few dollars and works without a data connection
Tire ageDOT date read by eyeDOT code read from the sidewall and stored with the tireWhen the date faces inward, both need the technician to look at the inner sidewall
ConditionThe technician looks and feelsThe technician looks and feels, then adds photos and notesEven: the judgment is the technician’s either way
Record for the next visitA line on the repair orderA dated report tied to the plate or VIN, with mileage when capturedNone

What are the benefits of a digital tire check?

The main benefit of a digital tire check is that each visit leaves a reading the next one can use. The report also helps the tire conversation, because the customer sees a worn shoulder at 3/32 in next to a photo of it. At one dealership, tire sales and service revenue rose 14% after the move to digital tire inspections.

At CJ BMW, digital tire inspections with Anyline add two hours of billable labor sales every day, with each technician saving about five minutes per report.

Every technician follows the same steps and fills in the same report, which keeps tire service consistent across multiple locations.

Driving Workshop Efficiency at CJ BMW with Anyline Tire Inspection

Anyline’s tire inspection gives CJ BMW technicians complete sidewall and vehicle data in seconds, so 90% of tire opportunities get spotted while the vehicle is still on-site.

Learn more

Why choose TireBuddy for digital tire checks?

TireBuddy puts vehicle identification, tread measurement, and the customer report in one app. You can run each test below on any vendor.

It runs on phones you already own

Each reading stays with its car and wheel

The plate or VIN comes first, so each tread reading is stored against the right vehicle and wheel position. Ask a vendor to show you how a reading reaches the customer’s record.

The technician makes the call

TireBuddy measures and records, and your technician decides on a bulge, a cut or a worn shoulder. Ask any vendor what its system decides on its own.

Shops start with the TireBuddy App. Software partners build the same tire inspections into their own product with the TireBuddy ToolKit. Anyline software passed 100 million digital tire inspections worldwide in 2025.

Check out the full workflow of TireBuddy:

Frequently asked questions about tire checks

What is a tire check?

A tire check is a short inspection of a vehicle’s tires that covers tread depth, pressure, condition and age. A shop may run one on its own or during an oil change, a rotation or a seasonal changeover. A quick check gives a verdict on each tire. A complete one also records the tread depth at each wheel position, any damage and the DOT date, so the next visit can compare.

How do I check if my tires are still good?

Start with tread depth. If the wear bars in the grooves sit level with the tread, the tire is down to 2/32 in and due for replacement. A tread gauge gives you a number, and a coin test gives a rough pass or fail; however, this method is not advised as reliable. Then check the pressure cold against the door placard, look for cuts, bulges and uneven wear, and read the DOT date to find the tire’s age.

What is the 3% rule for tires?

The 3% rule is a fitment habit: keep a replacement tire’s overall diameter within about 3% of the original size. No regulation or tire standard sets it, and we found no primary source for the figure. Use the placard on the driver’s door edge for the original size, and check the vehicle maker’s approved sizes before fitting anything different. A tire check is a good moment to confirm all four tires match.

How do you integrate digital tire checks into your shop?

Start by picking the modules your workflow needs: VIN, license plate, tire sidewall, and tire tread, for iOS, Android, or cross-platform apps. Put the plate or VIN step first, so every tire result is tied to the right vehicle. The sidewall module returns size, make, model, and DOT code, and tread results come back per tire after upload. Your app stores the results and builds its own report. Software teams can build the same inspections into their app with the TireBuddy ToolKit.